Loadbank - Rexgear/ITECH IT8200

Parameters

  • comm: Communications Interface (default: VISA)
  • serial_port: Serial Port (default: COM1)
  • baudrate: Baud Rate (default: 115200)
  • bytesize: Byte Size (default: 8)
  • parity: Parity (default: PARITY_NONE)
  • stopbits: Stop Bits (default: 1)
  • xonxoff: XON/XOFF (default: False)
  • rtscts: RTS/CTS (default: False)
  • dsrdtr: DSR/DTR (default: False)
  • ipaddr: IP Address (default: 192.168.1.10)
  • ipport: IP Port (default: 5025)
  • gpib_bus_address: GPIB Bus Address (default: 6)
  • gpib_board: GPIB Board Number (default: 0)
  • visa_device: VISA Device String (default: USB0::0x0A69::0x086C::662040000329::0::INSTR)
  • visa_path: VISA Driver Path (default: )
  • volts: Voltage (default: 240.0)
  • freq: Frequency (default: 60.0)
  • phases: Phases (default: 1)

Operations

Get Operations

  • Device Info
  • Query
    • qstr: Query String (default: )

Set Operations

  • Voltage
    • voltage: Voltage (V) (default: 240.0)
  • Frequency
    • frequency: Frequency (Hz) (default: 60.0)
  • RLC
    • resistance: Resistance (W) (default: )
    • inductance: Inductance (Var) (default: )
    • capacitance: Capacitance (Var) (default: )
    • pause: Pause for Human Tuning (default: No)
  • Resistance
    • resistance: Resistance (W) (default: 0.0)
  • Inductance
    • inductance: Inductance (VA) (default: 0.0)
  • Capacitance
    • capacitance: Capacitance (Var) (default: 0.0)
  • Command
    • i_max: Max Current (A) (default: 300.0)
  • Command
    • cstr: Command String (default: )