DC Simulator - ChromaPV

Parameters

  • comm: Communications Interface (default: VISA)
  • serial_port: Serial Port (default: COM1)
  • baudrate: Baud Rate (default: 115200)
  • bytesize: Byte Size (default: 8)
  • parity: Parity (default: PARITY_NONE)
  • stopbits: Stop Bits (default: 1)
  • xonxoff: XON/XOFF (default: False)
  • ipaddr: IP Address (default: 192.168.1.10)
  • ipport: IP Port (default: 5025)
  • gpib_bus_address: GPIB Bus Address (default: 6)
  • gpib_board: GPIB Board Number (default: 0)
  • visa_device: VISA Device String (default: GPIB0::6::INSTR)
  • visa_path: VISA Driver Path (default: visa32.dll)
  • pmp: MPP Power (W) (default: 5000)
  • vmp: MPP Voltage (V) (default: 460)
  • voc: Open Circuit Voltage (V) (default: 500)
  • isc: Short Circuit Current (I) (default: 13)

Operations

Get Operations

  • Power
  • DC Output State
  • Device Info
  • Query
    • qstr: Query String (default: )

Set Operations

  • Power
    • power: Power (W) (default: )
  • DC Output State
    • state: DC Output State (default: )
  • Command
    • cstr: Command String (default: )