AC Simulator - Opal-RT

Parameters

  • phases: Phases (default: 1)
  • v_nom: Nominal voltage for all phases (L-N) (default: 277.2)
  • v_max: Max Voltage (default: 300)
  • v_min: Min Voltage (default: 120)
  • freq: Frequency (default: 60.0)
  • f_max: Max Frequency (default: 70)
  • f_min: Min Frequency (default: 45)
  • rt_lab_version: RT-LAB Version (default: 2020.4)
  • project_dir_path: Project Directory Path (default: C:\Users\DETLDAQ\OPAL-RT\RT-LABv2020.4_Workspace\IEEE1547_JAY_TESTS\IEEE1547_JAY_TESTS.llp)
  • target_name: RT-LAB Target Name (default: RTServer)
  • rt_lab_model: RT-LAB Model (.mdl or .slx) (default: IEEE_1547_Testing_PHIL.mdl)
  • keep_sim_running: Connect Directly to Running RT-Lab Simulation (default: Yes)
  • rt_mode: Real-Time Simulation Mode (default: Hardware)
  • hil_stop_time: Simulation Stop Time (s) (default: 3600.0)
  • sim_mode: RT-LAB Test Mode (RMS tests or ride-through profiles) (default: Default)

Operations

Get Operations

  • Device Info
  • AC Output State
  • Voltage
  • Frequency

Set Operations

  • AC Output State
    • state: AC Output State (default: )
  • Voltage
    • v: Voltage - All phases (V) (default: )
    • v1: Voltage - Phase A (V) (default: )
    • v2: Voltage - Phase B (V) (default: )
    • v3: Voltage - Phase C (V) (default: )
  • Frequency
    • hz: Frequency (Hz) (default: )
    • hz_slew_rate: Frequency Slew Rate (Hz/sec) (default: )
  • AC Profile
    • prof_name: Profile Name (default: )
  • Start AC Profile