AC Simulator - Rexgear/ITECH¶
Parameters¶
- phases: Phases (default: 3)
- phase_angle: Phase Angle (default: 120)
- v: Voltage - All phases (default: 277)
- v_max: Max Voltage (default: 500)
- i_max: Max Current (default: 100)
- freq: Frequency (default: 60.0)
- freq_slew_rate: Frequency Slope (default: 1000)
- harmonic: Upper Harmonic Order For Reads (default: 50)
- comm: Communications Interface (default: VISA)
- serial_port: Serial Port (default: COM1)
- baudrate: Baud Rate (default: 115200)
- bytesize: Byte Size (default: 8)
- parity: Parity (default: PARITY_NONE)
- stopbits: Stop Bits (default: 1)
- xonxoff: XON/XOFF (default: False)
- rtscts: RTS/CTS (default: False)
- dsrdtr: DSR/DTR (default: False)
- ipaddr: IP Address (default: 192.168.1.10)
- ipport: IP Port (default: 30000)
- gpib_bus_address: GPIB Bus Address (default: 6)
- gpib_board: GPIB Board Number (default: 0)
- visa_device: VISA Device String (default: USB0::0x0A69::0x086C::662040000329::0::INSTR)
- visa_path: VISA Driver Path (default: )
- state: AC Output State (default: ON)
Operations¶
Get Operations¶
- Device Info
- AC Output State
- Voltage
- Frequency
- Voltage Harmonics
- Current Harmonics
- Voltage THD
- Current THD
- Profile State
- Profile Info
- Query
- qstr: Query String (default: )
Set Operations¶
- AC Output State
- state: AC Output State (default: )
- Voltage
- v: Voltage - All phases (V) (default: )
- v1: Voltage - Phase A (V) (default: )
- v2: Voltage - Phase B (V) (default: )
- v3: Voltage - Phase C (V) (default: )
- Frequency
- freq: Frequency (Hz) (default: )
- freq_slew_rate: Frequency Slew Rate (Hz/sec) (default: )
- AC Profile
- prof_name: Profile Name (default: )
- Profile by CSV Name
- prof_name: Profile Name with .csv included (default: )
- Command
- cstr: Command String (default: )
- Start AC Profile