AC Simulator - Ametek¶
Parameters¶
- phases: Phases (default: 3)
- wiring: Wiring (default: LN)
- phase_angle: Phase Angle (default: 120)
- v: Nominal LN Voltage (default: 120)
- v_max: Max Voltage (default: 300)
- i_max: Max Current (default: 30)
- freq: Frequency (default: 60.0)
- harmonic: Upper Harmonic Order For Reads (default: 50)
- comm: Communications Interface (default: TCP)
- energize: Set Output on Initialization (default: Yes)
- state: AC Output State (default: ON)
- serial_port: Serial Port (default: COM1)
- baudrate: Baud Rate (default: 115200)
- bytesize: Byte Size (default: 8)
- parity: Parity (default: PARITY_NONE)
- stopbits: Stop Bits (default: 1)
- xonxoff: XON/XOFF (default: False)
- rtscts: RTS/CTS (default: False)
- dsrdtr: DSR/DTR (default: False)
- ipaddr: IP Address (default: 127.0.0.1)
- ipport: IP Port (default: 7771)
Operations¶
Get Operations¶
- Device Info
- AC Output State
- Voltage
- Frequency
- Voltage Harmonics
- Current Harmonics
- Voltage THD
- Current THD
- Query
- qstr: Query String (default: )
Set Operations¶
- AC Output State
- state: AC Output State (default: )
- Voltage
- v: Voltage - All phases (V) (default: )
- v1: Voltage - Phase A (V) (default: )
- v2: Voltage - Phase B (V) (default: )
- v3: Voltage - Phase C (V) (default: )
- Frequency
- hz: Frequency (Hz) (default: )
- hz_slew_rate: Frequency Slew Rate (Hz/sec) (default: )
- Phase Angles
- ph1: Phase 1 Angle (deg) (default: 0.0)
- ph2: Phase 2 Angle (deg) (default: 240.0)
- ph3: Phase 3 Angle (deg) (default: 120.0)
- AC Profile
- prof_name: Profile Name (default: )
- Command
- cstr: Command String (default: )
- Start AC Profile