AC Simulator - Sunrex

Parameters

  • phases: Phases (default: 1)
  • comm: Communications Interface (default: TCP)
  • serial_port: Serial Port (default: COM1)
  • baudrate: Baud Rate (default: 115200)
  • bytesize: Byte Size (default: 8)
  • parity: Parity (default: PARITY_NONE)
  • stopbits: Stop Bits (default: 1)
  • xonxoff: XON/XOFF (default: False)
  • rtscts: RTS/CTS (default: False)
  • dsrdtr: DSR/DTR (default: False)
  • ipaddr: IP Address (default: 192.168.0.171)
  • ipport: IP Port (default: 1234)
  • state: AC Output State (default: ON)

Operations

Get Operations

  • Device Info
  • AC Output State
  • Voltage
  • Frequency
  • Query
    • qstr: Query String (default: )

Set Operations

  • AC Output State
    • state: AC Output State (default: )
  • Voltage
    • v: Voltage - All phases (V) (default: )
    • v1: Voltage - Phase A (V) (default: )
    • v2: Voltage - Phase B (V) (default: )
    • v3: Voltage - Phase C (V) (default: )
  • Frequency
    • hz: Frequency (Hz) (default: )
  • Command
    • cstr: Command String (default: )
  • Start AC Profile