DAQ - DEWESoft NET¶
Parameters¶
- comm: Communications Interface (default: TCP)
- ipaddr: Server IP Address (default: 127.0.0.1)
- ipport: Server IP Port (default: 8999)
- deweproxy_ipaddr: Proxy IP Address (default: 0.0.0.0)
- deweproxy_ipport: Proxy IP Port (default: 9999)
- sample_interval: Sample Interval (ms) (default: 1000)
- sample_interval_dewe: Sample Interval (ms) for Dewenet Controller (default: 10000)
- AC_VRMS_1: AC RMS Voltage Line 1 (default: EUT/U_rms_L1)
- AC_VRMS_2: AC RMS Voltage Line 2 (default: EUT/U_rms_L2)
- AC_VRMS_3: AC RMS Voltage Line 3 (default: EUT/U_rms_L3)
- AC_IRMS_1: AC RMS Current Line 1 (default: EUT/I_rms_L1)
- AC_IRMS_2: AC RMS Current Line 2 (default: EUT/I_rms_L2)
- AC_IRMS_3: AC RMS Current Line 3 (default: EUT/I_rms_L3)
- AC_FREQ_1: Line 1 Frequency (default: EUT/Frequency)
- AC_FREQ_2: Line 2 Frequency (default: EUT/Frequency)
- AC_FREQ_3: Line 3 Frequency (default: EUT/Frequency)
- AC_P_1: AC Avg Active Power Phase 1 (default: EUT/P_L1)
- AC_P_2: AC Avg Active Power Phase 2 (default: EUT/P_L2)
- AC_P_3: AC Avg Active Power Phase 3 (default: EUT/P_L3)
- AC_S_1: AC Avg Apparent Power Phase 1 (default: EUT/S_L1)
- AC_S_2: AC Avg Apparent Power Phase 2 (default: EUT/S_L2)
- AC_S_3: AC Avg Apparent Power Phase 3 (default: EUT/S_L3)
- AC_Q_1: AC Avg Reactive Power Phase 1 (default: EUT/Q_L1)
- AC_Q_2: AC Avg Reactive Power Phase 2 (default: EUT/Q_L2)
- AC_Q_3: AC Avg Reactive Power Phase 3 (default: EUT/Q_L3)
- AC_PF_1: AC Power Factor Phase 1 (default: EUT/PF_L1)
- AC_PF_2: AC Power Factor Phase 2 (default: EUT/PF_L2)
- AC_PF_3: AC Power Factor Phase 3 (default: EUT/PF_L3)
- DC_V: DC Voltage (default: PV/Urms_L1)
- DC_I: DC Current (default: PV/Irms_L1)
- DC_P: DC Power (default: PV/P_L1)
Operations¶
Get Operations¶
- Device Info
- Query
- qstr: Query String (default: )
- Current Power Data
- Output Current
- Load data log from csv
- filepath: CSV Path (default: )
- Harmonics
- orders: Harmonic orders to capture (default: 50)
- DC Component
Set Operations¶
- Command
- cstr: Command String (default: )
- DC Component
- Trigger
- pre_trig: Pre-Trigger Time (s) (default: 0.5)
- post_trig: Post-Trigger Time (s) (default: 2.5)
- sample_rate: Sample Rate (Hz) (default: 5000)
- trigger_level: Trigger Level (%) (default: 50.0)
- trigger_source: Trigger Source (default: EXT)
- trigger_slope: Trigger Slope (default: RISE)
- Data
- Local FTP Server
- Data
- Local FTP Server