DER IEEE 1547 - IEEE 2030.5

Parameters

  • poll_rate: Poll Rate for DERProgram (default: )
  • pin: Client PIN (default: )

Operations

Get Operations

  • Nameplate Information
  • Configuration Information
  • Monitoring Information
  • Constant Power Factor
  • Voltage-Reactive Power
  • Active Power-Reactive Power
  • Constant Reactive Power
  • Voltage-Active Power
  • Low Voltage Trip
  • High Voltage Trip
  • Low Frequency Trip
  • High Frequency Trip
  • Frequency Droop
  • Enter Service
  • Limit Maximum Active Power

Set Operations

  • Configuration Information
    • NP_P_MAX-AS: Active power rating at unity power factor (default: )
    • NP_VA_MAX-AS: Apparent power maximum rating (default: )
  • Constant Power Factor
    • CONST_PF_MODE_ENABLE-AS: Constant Power Factor Mode Enable (default: )
    • CONST_PF_EXCITATION-AS: Constant Power Factor Excitation (default: )
    • CONST_PF_INJ-AS: Constant Power Factor (default: )
    • derc_start_time: DERControl Start Time (default: )
    • derc_duration: DERControl Duration (default: )
    • derp_write_path: DERProgram Path (default: )
  • Voltage-Reactive Power
    • QV_MODE_ENABLE-AS: Voltage-Reactive Power Mode Enable (default: )
    • QV_VREF-AS: Vref (p.u.) (default: )
    • QV_VREF_AUTO_MODE-AS: Autonomous Vref Adjustment Enable (default: )
    • QV_VREF_OLRT-AS: Vref Adjustment Time Constant (s) (default: )
    • QV_OLRT-AS: Open Loop Response Time (default: )
    • QV_CURVE_V1-AS: Curve Point V1 (VRef p.u.) (default: )
    • QV_CURVE_Q1-AS: Curve Point Q1 (VA Max p.u.) (default: )
    • QV_CURVE_V2-AS: Curve Point V2 (VRef p.u.) (default: )
    • QV_CURVE_Q2-AS: Curve Point Q2 (VA Max p.u.) (default: )
    • QV_CURVE_V3-AS: Curve Point V3 (VRef p.u.) (default: )
    • QV_CURVE_Q3-AS: Curve Point Q3 (VA Max p.u.) (default: )
    • QV_CURVE_V4-AS: Curve Point V4 (VRef p.u.) (default: )
    • QV_CURVE_Q4-AS: Curve Point Q4 (VA Max p.u.) (default: )
    • derc_start_time: DERControl Start Time (default: )
    • derc_duration: DERControl Duration (default: )
  • Active Power-Reactive Power
    • QP_MODE_ENABLE-AS: Active Power-Reactive Power Mode Enable (default: )
    • QP_OLRT-AS: Open Loop Response Time (default: )
    • QP_CURVE_P3-LOAD-AS: Curve Point P3 Load (W Max p.u.) (default: )
    • QP_CURVE_Q3-LOAD-AS: Curve Point Q3 Load (VA Max p.u.) (default: )
    • QP_CURVE_P2-LOAD-AS: Curve Point P2 Load (default: )
    • QP_CURVE_Q2-LOAD-AS: Curve Point Q2 Load (default: )
    • QP_CURVE_P1-LOAD-AS: Curve Point P1 Load (default: )
    • QP_CURVE_Q1-LOAD-AS: Curve Point Q1 Load (default: )
    • QP_CURVE_P1-GEN-AS: Curve Point P1 Gen (default: )
    • QP_CURVE_Q1-GEN-AS: Curve Point Q1 Gen (default: )
    • QP_CURVE_P2-GEN-AS: Curve Point P2 Gen (default: )
    • QP_CURVE_Q2-GEN-AS: Curve Point Q2 Gen (default: )
    • QP_CURVE_P3-GEN-AS: Curve Point P3 Gen (default: )
    • QP_CURVE_Q3-GEN-AS: Curve Point Q3 Gen (default: )
    • derc_start_time: DERControl Start Time (default: )
    • derc_duration: DERControl Duration (default: )
  • Constant Reactive Power
    • CONST_Q_MODE_ENABLE-AS: Constant Reactive Power Mode Enable (default: )
    • CONST_Q-AS: Constant Reactive Power Setting (VA Max p.u.) (default: )
    • derc_start_time: DERControl Start Time (default: )
    • derc_duration: DERControl Duration (default: )
  • Voltage-Active Power
    • PV_MODE_ENABLE-AS: Voltage-Active Power Mode Enable (default: )
    • PV_OLRT-AS: Open Loop Response Time (default: )
    • PV_CURVE_V1-AS: Curve Point V1 (VRef p.u.) (default: )
    • PV_CURVE_P1-AS: Curve Point P1 (W Max p.u.) (default: )
    • PV_CURVE_V2-AS: Curve Point V2 (default: )
    • PV_CURVE_P2-AS: Curve Point P2 (default: )
    • derc_start_time: DERControl Start Time (default: )
    • derc_duration: DERControl Duration (default: )
  • Low Voltage Trip
    • V_TRIP_ENABLE-AS: Voltage Trip Enable (default: )
    • UV1_TRIP_V-AS: UV1 - V (default: )
    • UV1_TRIP_T-AS: UV1 - Time (default: )
    • UV2_TRIP_V-AS: UV2 - V (default: )
    • UV2_TRIP_T-AS: UV2 - Time (default: )
    • derc_start_time: DERControl Start Time (default: )
    • derc_duration: DERControl Duration (default: )
  • High Voltage Trip
    • V_TRIP_ENABLE-AS: Voltage Trip Enable (default: )
    • OV2_TRIP_V-AS: OV2 - V (default: )
    • OV2_TRIP_T-AS: OV2 - Time (default: )
    • OV1_TRIP_V-AS: OV1 - V (default: )
    • OV1_TRIP_T-AS: OV1 - Time (default: )
    • derc_start_time: DERControl Start Time (default: )
    • derc_duration: DERControl Duration (default: )
  • Low Frequency Trip
    • FREQ_TRIP_ENABLE-AS: Freq Trip Enable (default: )
    • UF1_TRIP_F-AS: UF1 - Freq (default: )
    • UF1_TRIP_T-AS: UF1 - Time (default: )
    • UF2_TRIP_F-AS: UF2 - Freq (default: )
    • UF2_TRIP_T-AS: UF2 - Time (default: )
    • derc_start_time: DERControl Start Time (default: )
    • derc_duration: DERControl Duration (default: )
  • High Frequency Trip
    • FREQ_TRIP_ENABLE-AS: Freq Trip Enable (default: )
    • OF2_TRIP_F-AS: OF2 - Freq (default: )
    • OF2_TRIP_T-AS: OF2 - Time (default: )
    • OF1_TRIP_F-AS: OF1 - Freq (default: )
    • OF1_TRIP_T-AS: OF1 - Time (default: )
    • derc_start_time: DERControl Start Time (default: )
    • derc_duration: DERControl Duration (default: )
  • Frequency Droop
    • PF_MODE_ENABLE-AS: Frequency Droop Mode Enable (default: )
    • PF_OLRT-AS: Open Loop Response Time (default: )
    • PF_DBOF-AS: dbOF (default: )
    • PF_DBUF-AS: dbUF (default: )
    • PF_KOF-AS: kOF (default: )
    • PF_KUF-AS: kUF (default: )
    • derc_start_time: DERControl Start Time (default: )
    • derc_duration: DERControl Duration (default: )
  • Enter Service
    • ES_PERMIT_SERVICE-AS: Permit Service (default: )
    • ES_V_LOW-AS: ES Voltage Low (VRef p.u) (default: )
    • ES_V_HIGH-AS: ES Voltage High (default: )
    • ES_F_LOW-AS: ES Frequency Low (Hz) (default: )
    • ES_F_HIGH-AS: ES Frequency High (default: )
    • ES_RANDOMIZED_DELAY-AS: ES Randomized Delay (default: )
    • ES_DELAY-AS: ES Delay (default: )
    • ES_RAMP_RATE-AS: ES Ramp Rate (default: )
    • derc_start_time: DERControl Start Time (default: )
    • derc_duration: DERControl Duration (default: )
  • Limit Maximum Active Power
    • AP_LIMIT_P_ENABLE-AS: Limit Active Power Mode Enable (default: )
    • AP_MAX_P-AS: Maximum Active Power Setting (W Max p.u.) (default: )
    • derc_start_time: DERControl Start Time (default: )
    • derc_duration: DERControl Duration (default: )
  • Constant Power Factor
  • Voltage-Reactive Power
  • Active Power-Reactive Power
  • Constant Reactive Power
  • Voltage-Active Power
  • Low Voltage Trip
  • High Voltage Trip
  • Low Frequency Trip
  • High Frequency Trip
  • Frequency Droop
  • Limit Maximum Active Power
  • Constant Power Factor
  • Voltage-Reactive Power
  • Active Power-Reactive Power
  • Constant Reactive Power
  • Voltage-Active Power
  • Low Voltage Trip
  • High Voltage Trip
  • Low Frequency Trip
  • High Frequency Trip
  • Frequency Droop
  • Limit Maximum Active Power