AC Simulator - NHR 9400 Series¶
Parameters¶
- phases: Phases (default: 1)
- v: Voltage - All phases (default: 120)
- i: Current - All phases (default: 10)
- v_max: Max Voltage (default: 300)
- i_max: Max Current (default: 30)
- v_range: Voltage Range (default: 300)
- i_range: Current Range (default: 30)
- p_max: Max Power (default: 6000)
- freq: Frequency (default: 60.0)
- freq_slew_rate: Frequency Slew Rate (default: 1000)
- comm: Communications Interface (default: TCP)
- ipaddr: IP Address (default: 192.168.1.10)
- ipport: IP Port (default: 5025)
- state: AC Output State (default: ON)
Operations¶
Get Operations¶
- Device Info
- AC Output State
- Voltage
- Frequency
- Power
- Power Factor
- Query
- qstr: Query String (default: )
Set Operations¶
- AC Output State
- state: AC Output State (default: )
- Voltage
- v: Voltage - All phases (V) (default: )
- v1: Voltage - Phase A (V) (default: )
- v2: Voltage - Phase B (V) (default: )
- v3: Voltage - Phase C (V) (default: )
- Current
- i: Current - All phases (A) (default: )
- ia: Current - Phase A (A) (default: )
- ib: Current - Phase B (A) (default: )
- ic: Current - Phase C (A) (default: )
- Frequency
- freq: Frequency (Hz) (default: )
- freq_slew_rate: Frequency Slew Rate (Hz/sec) (default: )
- AC Profile
- prof_name: Profile Name (default: )
- Command
- cstr: Command String (default: )
- Start AC Profile