AC Simulator - Cinergia¶
Parameters¶
- phases: Phases (default: 1)
- v_max: Max Voltage (default: 300)
- i_max: Max Current (default: 30)
- freq: Frequency (default: 60.0)
- comm: Communications Interface (default: TCP)
- ipaddr: IP Address (default: 192.168.1.10)
- ipport: IP Port (default: 502)
- state: AC Output State (default: ON)
Operations¶
Get Operations¶
- Device Info
- AC Output State
- Voltage
- Frequency
Set Operations¶
- AC Output State
- state: AC Output State (default: )
- Voltage
- v: Voltage - All phases (V) (default: )
- v1: Voltage - Phase A (V) (default: )
- v2: Voltage - Phase B (V) (default: )
- v3: Voltage - Phase C (V) (default: )
- Frequency
- hz: Frequency (Hz) (default: )
- hz_slew_rate: Frequency Slew Rate (Hz/sec) (default: )
- AC Profile
- prof_name: Profile Name (default: )
- Start AC Profile