DC Simulator - Rexgear/ITECH¶
Parameters¶
- volts: Voltage (default: 350)
- amps: Current (default: 40)
- v_max: Max Voltage (default: 920)
- i_max: Max Current (default: 40)
- p_max: Max Power (default: 5000)
- mode: Working Mode (default: CV)
- comm: Communications Interface (default: VISA)
- serial_port: Serial Port (default: COM1)
- baudrate: Baud Rate (default: 115200)
- bytesize: Byte Size (default: 8)
- parity: Parity (default: PARITY_NONE)
- stopbits: Stop Bits (default: 1)
- xonxoff: XON/XOFF (default: False)
- rtscts: RTS/CTS (default: False)
- dsrdtr: DSR/DTR (default: False)
- ipaddr: IP Address (default: 192.168.1.10)
- ipport: IP Port (default: 30000)
- gpib_bus_address: GPIB Bus Address (default: 6)
- gpib_board: GPIB Board Number (default: 0)
- visa_device: VISA Device String (default: TCPIP::192.168.200.101::INSTR)
- visa_path: VISA Driver Path (default: C:\Windows\System32\visa32.dll)
- state: AC Output State (default: ON)
- config_state: Configure AC Output State on Initialization (default: Yes)
- config_mode: Configure Voltage/Current Mode on Initialization (default: Yes)
- config_protection: Configure Protection Limits on Initialization (default: Yes)
Operations¶
Get Operations¶
- Device Info
- AC Output State
- Power
- Voltage
- Current
- Query
- qstr: Query String (default: )
- Mode
- Status
Set Operations¶
- DC Output State
- state: DC Output State (default: )
- Power
- power: Power (W) (default: )
- Voltage
- voltage: Voltage (V) (default: )
- Current
- amps: Current (A) (default: )
- Command
- cstr: Command String (default: )
- Mode
- mode: Mode (default: )
- Local Control
- Start AC Profile
- Reset Device